[c-nsp] Packet Memory buffer test detected errors

Nikolay Pavlov quetzal at zone3000.net
Thu Jul 6 12:03:02 EDT 2006


Hi, folks. 
Could some one explaine me what is it? And what should i do to fix this?

%C4K_SWITCHINGENGINEMAN-3-PACKETMEMORYTESTPARTIALFAILURE: (Suppressed
%9004 times)Packet Memory buffer test detected errors with 25% of the 
packet buffers.  Switch operation will continue, with potentially
reduced performance

Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version
12.2(18)EW, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 30-Jan-04 02:04 by hqluong
Image text-base: 0x00000000, data-base: 0x010B0624

ROM: 12.1(12r)EW
Dagobah Revision 55, Swamp Revision 16

cscat4506-sw11-NY uptime is 4 weeks, 6 days, 23 hours, 43 minutes
System returned to ROM by reload
System restarted at 12:27:41 EDT Thu Jun 1 2006
System image file is "bootflash:cat4000-i9s-mz.122-18.EW.bin"

cisco WS-C4506 (MPC8245) processor (revision 7) with 262144K bytes of
memory.
Processor board ID FOX0748024H
Last reset from Reload
9 Virtual Ethernet/IEEE 802.3  interface(s)
50 Gigabit Ethernet/IEEE 802.3 interface(s)
467K bytes of non-volatile configuration memory.

Configuration register is 0x2102


-- 
========================================================================= 
= Best regards, Nikolay Pavlov. <<<------------------------------------ = 
========================================================================= 


More information about the cisco-nsp mailing list