[c-nsp] Cisco 2801 router and WIC-1AM-V2 for outgoing internet traffic reduandacy

[Gert Doering]

Hi,

On Thu, Jul 06, 2006 at 06:57:06PM -0700, Kevin Graham wrote:
> On 7/6/06, Dave Lim <dave.daturax at gmail.com> wrote:
> 
> > But as this uses NAT, how does the NAT failsover?
> 
> Don't. Have a second NAT setup for the Dialer and let routing take
> care of whether or not its used.

Hmmm, if the dialer interface and the leased line interface are on
the same router, both tagged as "ip nat outside", and will use the same 
IP addresses (read: no "dynamic IP addresses" on the ISP side), NAT 
shouldn't really care - and the failover should leave NAT table entries
intact.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de