[c-nsp] Configuration archiving doesnt work

[Kim Onnel]

This is how i configured it and it only archives the last two lines in the
configuration, is it something i missed ?

Edge #conf t
Enter configuration commands, one per line. End with CNTL/Z.
Edge (config)#archive
Edge (config-archive)#path disk1:Archive-test
Edge (config-archive)#maximum 10
Edge (config-archive)#time-period 20

Edge#dir disk1:
Directory of disk1:/
1 -rw- 20326300 Jun 14 1993 00:59:02 +00:00 c7200-p-mz.124-5a.bin
2 -rw- 18446528 Mar 23 1993 02:58:52 +00:00 c7200-js-mz.122-15.T7.bin
3 -rw- 195 Jul 11 2006 13:06:56 +00:00 Archive-test-1
4 -rw- 195 Jul 11 2006 13:11:56 +00:00 Archive-test-2
5 -rw- 195 Jul 11 2006 13:16:56 +00:00 Archive-test-3
6 -rw- 196 Jul 11 2006 13:21:56 +00:00 Archive-test-4
7 -rw- 196 Jul 11 2006 13:26:50 +00:00 Archive-test-5
8 -rw- 196 Jul 11 2006 13:48:42 +00:00 Archive-test-6
47974400 bytes total (9187328 bytes free)
Edge#
Edge#
Edge#

/* Only last two lines are archived, why not all ??? */

Edge#more disk1:Archive-test-6
!
! Last configuration change at 13:47:20 UTC Tue Jul 11 2006 by mfoua
! NVRAM config last updated at 13:34:31 UTC Tue Jul 11 2006 by aossam
!
boot-start-marker
boot-end-marker
!
!
!
!
!
!
end
Edge#

While manual archive works
Edge #Archive config






Edge#sh ver
Cisco IOS Software, 7200 Software (C7200-P-M), Version 12.4(5a), RELEASE
SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Sat 14-Jan-06 00:25 by alnguyen

ROM: System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117],
DEVELOPMENT SOFTWARE
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.1(3a)E5, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)

Edge uptime is 19 weeks, 17 hours, 50 minutes
System returned to ROM by reload at 14:32:33 UTC Tue Feb 28 2006
System restarted at 14:39:00 UTC Tue Feb 28 2006
System image file is "disk0:c7200-p-mz.124-5a.bin"

Cisco 7204VXR (NPE225) processor (revision A) with 114688K/16384K bytes of
memory.
Processor board ID 23661907
R527x CPU at 262MHz, Implementation 40, Rev 10.0, 2048KB L2 Cache
4 slot VXR midplane, Version 2.1

Last reset from power-on

Number of Fast PAs = 3
Number of Fast+Medium PAs = 3
Total number of PA bandwidth points consumed = 380
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.

2 FastEthernet interfaces
8 Serial interfaces
2 ATM interfaces
125K bytes of NVRAM.

47040K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102