[c-nsp] Transporting TDM voice DS3s over Ethernet

[Marko Milivojevic]

> Point me to such a commercial product that will correctly transport TDM voice frames across Ethernet at that scale that does not use VoIP or DSP's.
> 
> If one does not already exist, then basically, you're describing a science fair project.

RAD GMUX-2000 will transport even STM-1 over IP, without DSP's. Transporting 
TDM over packet networks has been done for ages. There is pretty much no 
difference if you're using IP or ATM :-)

Marko.