[c-nsp] port storm-control

[Charles Regan]

Hello all,
My first post here.
I am a small WISP and I am running a couple of 2924xl switch that are
plugged into my access points. My access points have around 100
clients on them.
To reduce the possibility of a broadcast storm I've set this setting
on the ports that the AP are plugged in:
 port storm-control broadcast action filter
 port storm-control broadcast trap
 port storm-control broadcast threshold rising 250 falling 200

I am not sure if the 250 packet/sec is enough or too much.
Can anybody guide me?

Thanks,
Charles

----------

c2924xl_bur#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5.2)XU,
MAINTENANCE INTERIM SOFTWARE
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 17-Jul-00 17:35 by ayounes
Image text-base: 0x00003000, data-base: 0x00301F3C

ROM: Bootstrap program is C2900XL boot loader

c2924xl_bur uptime is 6 weeks, 4 days, 19 hours, 15 minutes
System returned to ROM by power-on
System image file is "flash:c2900XL-c3h2s-mz-120.5.2-XU.bin"


cisco WS-C2924M-XL (PowerPC403GA) processor (revision 0x11) with
8192K/1024K bytes of memory.
Processor board ID FAA0352L06X, with hardware revision 0x03
Last reset from power-on

Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
28 FastEthernet/IEEE 802.3 interface(s)

Module     Ports  Model                  HW Version            SW version
------     -----  -----                  ----------            ----------
     1      4     WS-X2914-XL-V          xxxx                  xxxx

Configuration register is 0xF

c2924xl_bur#

-------------