[c-nsp] Cisco 6500 Port-Channel Problem.

[Alex Cruz Farmer]

Carl Kloppenborg wrote:
> What does a show interface capability show for each port?

#sh int gi5/8
GigabitEthernet5/8 is up, line protocol is down (notconnect)
   Hardware is C6k 1000Mb 802.3, address is 00b0.c23b.7c0a (bia 00b0.c23b.7c0a)
   Description: 2 - July 06
   MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
      reliability 255/255, txload 240/255, rxload 1/255
   Encapsulation ARPA, loopback not set
   Keepalive set (10 sec)
   Full-duplex, 1000Mb/s
   input flow-control is off, output flow-control is off


#sh int gi5/4 (currently live)
GigabitEthernet5/4 is up, line protocol is up (connected)
   Hardware is C6k 1000Mb 802.3, address is 00b0.c23b.7c0a (bia 00b0.c23b.7c0a)
   Description: 1 - July 06
   MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
      reliability 255/255, txload 153/255, rxload 4/255
   Encapsulation ARPA, loopback not set
   Keepalive set (10 sec)
   Full-duplex, 1000Mb/s
   input flow-control is off, output flow-control is off

Thanks!

Alex.