[c-nsp] cisco LX to HP

[Bill Wichers]

I've seen a similar issue before. Solution was to hard set full duplex on
both ends of the link. Sounds strange to have to do that on a fiber gig
link, but it worked in my case.

     -Bill

> Voll, Scott wrote:
>> I have a 3750 -12g layer 3 switch that I'm trying to connect to a HP
>> 4000 over a LX single mode.
>>
>>
>>
>> The Cisco comes up and has link but the HP does not have link.  Has
>> anyone seen anything like this before?
>>
>>
>>
>> The Cisco is running 12.2.25see1.



*****************************
Waveform Technology
Systems Engineer