[c-nsp] "show platform hardware capacity" shows sup720-3b FIB table at 98%

[Tim Stevenson]

For sup2 (& sup720) sh mls cef summary will show you the number of 
entries in use. This is a sup2 in my lab running SXF5:

tstevens-6513#sh mls cef sum
Load for five secs: 6%/0%; one minute: 25%; five minutes: 10%
Time source is NTP, 11:01:54.296 PDT Fri Jul 21 2006

Total CEF switched packets:  0000000000000009
Total CEF switched bytes:    0000000000000414
Total routes:                240021
     IP unicast routes:       240021
     IPX routes:              0
     IP multicast routes:     0
tstevens-6513#

And a sup720:

tstevens-6506#sh mls cef summar
Load for five secs: 0%/0%; one minute: 1%; five minutes: 1%
Time source is NTP, 11:09:40.108 PDT Fri Jul 21 2006

Total routes:                     74
     IPv4 unicast routes:          61
     IPv4 Multicast routes:        3
     MPLS routes:                  0
     IPv6 unicast routes:          10
     IPv6 multicast routes:        0
     EoM routes:                   0
tstevens-6506#

Tim

At 09:59 PM 7/20/2006 -0700, Darrell Root exclaimed:
>On a sup2 in hybrid mode "show polaris fibmgr usage" shows:
>
>
>Total FIB entries:        262144
>Allocated FIB entries:    193003
>Free FIB entries:          69141
>FIB entries used for IP ucast:  193002
>FIB entries used for IPX     :       1
>FIB entries used for IP mcast:       0
>
>So I think my sup2 hybrids are ok.
>
>Question: Are my sup2 native-ios boxes ok?  I can't figure out how to
>verify my free FIB
>capacity on my 12.1E boxes.  Anyone know the magic command for that?



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.