[c-nsp] FWSM issues

[Stefan Baltus]

On Fri, Jul 21, 2006 at 08:18:15PM +0200, Gert Doering wrote:
> Hi,
> 
> On Fri, Jul 21, 2006 at 07:43:34PM +0200, Stefan Baltus wrote:
> > which is wrong ofcourse. However: I cannot seem to remove ports 8/29-32
> > from this channel group. There is no thing as 'clear port channel ...'.
> > 
> > I tried set port channel 8/29-32 mode off, but that doesn't help.
> 
> Try:
> 
> set port channel 9/1-6

I tried that. The problem is that the channel to the FWSM is not configurable.
It is just there. When issueing the command mentioned above, it says something
like: Not supported on module 9.

Stefan

-- 
E: stefan at iunxi.nl                      iunxi BV
M: +31 (0)6 18844094                    Postbus 1315
T: +31 (0)36 5400524                    1300 BH   ALMERE
F: +31 (0)36 5400526