[c-nsp] Slightly OT: Remote DC power management... for Cisco :-)

[Ted Mittelstaedt]

get a regular AC one and use 4-6 48 volt power transformers plugged into it.

Ted

----- Original Message ----- 
From: "Chris Griffin" <cgriffin at ufl.edu>
To: "cisco-nsp" <cisco-nsp at puck.nether.net>
Sent: Friday, July 14, 2006 10:19 AM
Subject: [c-nsp] Slightly OT: Remote DC power management... for Cisco :-)


> Hi all,
> Does anyone have any specific recommendations for remote DC (-48vdc) 
> power control (remote reboot).  Looking for a 1U unit that has 4-6 A/B 
> outputs at up to 10A each.  Serial control is ok, but IP based would be 
> better.  Anyone using any of the WTI stuff?
> 
> Thanks
> -- 
> Chris Griffin                                cgriffin at ufl.edu
> Sr. Network Engineer - CCNP                  Phone: (352) 392-2061
> Network Services / Florida LambdaRail        Fax:   (352) 392-9440
> University of Florida                        Gainesville, FL 32611
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>