[c-nsp] TCAM troubles on 3750 stack

[Saku Ytti]

On (2006-06-02 18:06 +0200), Alexander Gall wrote:
  
> The first issue (traffic to default route forwarded in software) was
> tracked to bug CSCsd77825, which causes the programming of some
> routes into hardware to fail even though the TCAM is not full.  All
> packets matching a covering aggregate are then punted to the CPU
> (presumably because the aggregate can point to a different adjacency
> than one of the more specifics and this needs to be checked in
> software).  This will be fixed in 12.2(25)SEE1, which should be
> released shortly.

It was released few days ago :).

> Cisco TAC could not yet reproduce the second problem (wrong MAC
> address used during ethernet header re-writing in a stacked
> configuration with IPv6 enabled) but they have acknowledged the bug
> and assigned ID CSCse38079 to it.

Thanks or the update Alexander!

-- 
  ++ytti