[c-nsp] Layer2 Switch Recommendations

[jim bartus]

I noticed people skipped straight from the 3750 to the 6500, is there no
point to the 4500 anymore?

-jim

On 6/3/06, David J. Hughes <bambi at hughes.com.au> wrote:
>
>
> On 03/06/2006, at 5:42 PM, Paul S. Brown wrote:
>
> > the WS-C3750G-48TS-S would also fit these requirements - 48
> > 10/100/1000 ports,
> > 4SFP ports and a 32Gb/s stack port - I had a similar requirement
> > recently and
> > I'd forgotten the stack ports exist.
>
> Great switch but each unit only has a single PSU and the original
> poster mentioned dual PSU's as a requirement.  Even if you drive the
> different stack members from different circuits you'll still drop ports
> if you lose a circuit.
>
>
> David
> ...
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>