[c-nsp] load balancing EoMPLS on PE via multiple WAN links

[kostas anagnopoulos]

what about routing pseudowires over a separate te tunnel each following a
different route

pseudo-class 1st-pseudowire
 preferred-path Tunnel0-over-1stOC3

pseudo-class 2nd-pseudowire
 preferred path Tunnel1-over-2ndOC3

regards
Kostas

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Phil Bedard
Sent: Friday, June 02, 2006 9:50 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] load balancing EoMPLS on PE via multiple WAN links


This is on 7600s with Sup720-3B/PFC-3B

One side has an 8-port OC3 OSM, other side is FlexWAN with 2-port OC3 PA.

We have a scenario where we have a PE router with GigE to customers who do
EoMPLS to another router.  We're adding a large-bandwidth customer and the
current single OC3 circuit is not enough to accomodate their bandwidth so we
want to add another OC3.     We've been told that the EoMPLS will not do
per-destination load balancing across the two OC3s.  What might be the best
solution to this problem without going to an OC12 trunk?   Forcing traffic
for the large bandwidth customer across the new OC3?

Thanks,

Phil
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.