[c-nsp] dynamically modifying PIX inbound NAT

[Phil Pierotti]

I have a customer with a pair of exchange servers on the LAN side of a PIX.

They have some monitoring software which detects failure of the exchange service/software and does some magic to reconfigure the failover server and bring it into operation - but it doesn't swap the IP addressing across as you'd expect in a true failover/cluster scenario.

Is there any way can dynamically change the inside/destination IP of a NAT on a PIX? 
ie some PIX feature or command?

I'm specifically meaning something other than hand-crafting my own expect script or whatever which logs into the PIX and changes it via the CLI.
(which is do-able, but not a particularly elegant solution)

Thanks in Advance,
Phil P





========================================================================
   This message has been scanned for spam & viruses by Mail Sleuth.
   To report SPAM forward the message to:    spam at mailsleuth.com.au
   Mail Sleuth                                www.mailsleuth.com.au
========================================================================