[c-nsp] BGP conundrum

[Alex Foster]

A little off topic, but looking for a clear yes/no on this one.

Net Diagram.
		     iBGP
    Cust Router A --------------Cust Router B
	  |  .1/29		|  .2/29
	  |			|
	   |		           |
	__|_________________|__	
		       |
		       |
		       |  .3/29
		 My Router A

The customer connects to my router via a shared L2 network (VLAN).  We
are BGP peering across each link ie:

Cust Router A ------neighbor with-------My Router A
Cust Router B ------neighbor with-------My Router A

The Interfaces on each router are all part of the same subnet, my
question is... will this work ?? If not, why not ??

Regards

Alex




The information in this e-mail and any attachments is confidential and may be subject to legal professional privilege. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are prohibited from, and therefore must not, read, copy, distribute, use or retain this message or any part of it. The views expressed in this e-mail may not represent those of Gamma Telecom.

This message has been scanned for viruses by MailController