[c-nsp] SPAN on 6509 switch

[Tilco van Dijk]

Limitations of this IOS, use 12.2(18)SXE or higher...

Some info can be found on CCO:
http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_
configuration_guide_chapter09186a0080160a5a.html

Regards,
Tilco



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Vikas Sharma
Sent: dinsdag 6 juni 2006 16:46
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] SPAN on 6509 switch

Hi,

I am trying to configure moitor session (SPAN) on 6509 switch. But
somehow I
can not monitor more than one port (need to monitor min of 10 ports).
What
can be the reason? Pls find the sh ver below.

Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-PK9SV-M), Version 12.2(17d)SXB1,
RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 28-May-04 19:13 by ccai
Image text-base: 0x40020FBC, data-base: 0x41F38000
ROM: System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)
BOOTLDR: s72033_rp Software (s72033_rp-PK9SV-M), Version 12.2(17d)SXB1,
RELEASE SOFTWARE (fc2)

DCNW6509A uptime is 12 weeks, 5 days, 23 hours, 41 minutes
Time since DCNW6509A switched to active is 12 weeks, 5 days, 23 hours,
41
minutes
System returned to ROM by unknown reload cause - suspect
boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19 (SP by power-on)
System restarted at 19:52:47 IST Wed Mar 8 2006
System image file is "sup-bootflash:s72033-pk9sv-mz.122-17d.SXB1.bin"


Regards
Vikas Sharma
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/