[c-nsp] C2950G sh arp
Phil Mayers
p.mayers at imperial.ac.uk
Thu Jun 8 17:55:46 EDT 2006
Shaun wrote:
> I dont think thats it, these addresses are not any of my assigned Networks,
> in fact there are many random addresses from diffrent networks.. a `sh arp
> | exc 204.10 | exc 204.15 | exc 208.67` displays 1500 lines, below is a snip
> of the first few pages...
>
> edge-138.12#sh arp | exc 204.10 | exc 204.15 | exc 208.67
> Protocol Address Age (min) Hardware Addr Type Interface
> Internet 222.171.23.98 125 0012.dada.0f42 ARPA Vlan2
> Internet 202.65.141.6 115 0012.dada.0f42 ARPA Vlan2
> Internet 62.166.210.74 70 0012.dada.0f42 ARPA Vlan2
> Internet 204.10.115.181 222 0012.dada.0f42 ARPA Vlan2
> Internet 201.152.55.102 212 0012.dada.0f42 ARPA Vlan2
> Internet 213.47.132.127 157 0012.dada.0f42 ARPA Vlan2
As someone already mentioned, you have proxy arp enabled on the router
(the default), and the wrong network mask on the 2950G.
0012.dada.0f42 is your 3750 / default gateway, isn't it?
Disable proxy arp on the 3750 interface, and be prepared to fix the
broken clients with wrong netmasks.
More information about the cisco-nsp
mailing list