[c-nsp] Configuring VWIC Interface Card (Multiflex Trunk - G.703)

[Dave Lim]

Hi guys,

I have a Cisco 2821 voice bundle router with this VWIC card. It is a
2-Port RJ-48 Multiflex Trunk - G.703 VWIC interface card
(VWIC-2MFT-G703). I am not intending to use the voice option but
getting one with voice bundle for future expansion

Note that this is a T1 line going to another country for our remote
site to site office.

What do I need to communicate to my ISP on the settings/configuration
ie. framing type etc. The things I need to take note. Ie. does the
framing type need to be the same for the remote router too?


http://www.cisco.com/en/US/products/hw/routers/ps221/prod_configuration_guide09186a00800a4063.html

Cheers
Dave