[c-nsp] Route-Map "AND" clause

[hjan at libero.it]

> What's your routing protocol in your core? 

OSPF, but a CITY is a nssa area x.
In the example CITY-1-POP is nssa area 1, CITY-2-POP is nssa area 2

>You could address this
> problem by increasing the administrative distance of the eigrp 1 process
> on CITY-2-POP so it is higher than your core IGP process. This way,
> CITY-2-POP will always prefer the prefixes it learns from the core,
> until CPE-1 dies and CITY-1-POP no longer advertises the customer
> prefixes.
> Would this help?

I have already thought to this but if redistribute eigrp into ospf, those route are sent with LSA type-5, ex1 or ex2 so that route are not inserted in city2 route table.
Change core routing for a customer isn't possibile, and change it due to a error done by one of the "guru" , i think it's crazy.

Thanks for your help Oli,
Gianluca