[c-nsp] Route Distinguisher 0:0

[Shaikh, Sultan]

Hello,

Has anyone seen "Route Distinguisher 0:0"?

I have a setup simulating an Inter-AS L3VPN - Back to Back VRF
configuration.

The problem is that in one of the VRFs, under command "show ip bgp vpnv4
vrf VRF_TEST" I see usual routes under the RD configured for the said
VRF alongwith with another RD 0:0 - which is not configured. There is
another router (redundant) with the same configuration (HSRP), this
router does not show RD 0:0.

Any idea why this irritant? I haven't observed any impact on forwarding
yet.


Thanks
~sultan

****************************************************************
"PLEASE NOTE:  This email,  and  any  attachments  hereto,  are
intended only  for use  by the specified addressee(s)  and  may
contain legally privileged and/or confidential and/or proprietary
information of KVH Co., Ltd.  and/or its affiliates  (including
personal information).  If you are not the intended recipient of
this email, please immediately notify the sender by email,  and
please permanently  delete the original,  any print out and any
copies of the foregoing. "
****************************************************************