[c-nsp] Cisco 7301 running at 99% CPU doing iBGP update

[a. Rahman Isnaini r. Sutan]

:) yah, should do some researches more.

It was happened last couple days to my gateway.
As I was pinging from other direct gateway, it migh be the CPU more than 
95%.
Couldn't issue sh proc cpu, at that time as the gateway responded slowly.

Thanks anyway Rodney, next we should watch in detail.

-- a.RI.r.sutan



----- Original Message ----- 
From: "Rodney Dunn" <rodunn at cisco.com>
To: "a. Rahman Isnaini r. Sutan" <risnaini at indo.net.id>
Cc: "Rodney Dunn" <rodunn at cisco.com>; <cisco-nsp at puck.nether.net>
Sent: Friday, June 30, 2006 10:03 AM
Subject: Re: [c-nsp] Cisco 7301 running at 99% CPU doing iBGP update


: I've never yet seen anone put that in the lab and prove there is
: transit packet loss when this happens.
:
: Traceroutes going to process level is one thing. Packet switched
: under interrupt is another.
:
: Feel free to prove me wrong. :)
:
: Rodney
:
:
: On Fri, Jun 30, 2006 at 09:44:09AM +0700, a. Rahman Isnaini r. Sutan 
wrote:
: > : CPU doesn't seem to be enough sometimes (reach 90%) especially right 
upon
: > : BGP scanning daemon is running.
: > : Is this normal for those above condition (10 Peers).
: >
: > : :> Yes...don't worry about it.
: >
: > As the CPU load get 90% there will be 1 % of lost to this router.
: > Which sometimes could harm some customer's applications which loss/delay
: > sensitive.
: >
: > -- a.RI.r.sutan
:
: