[c-nsp] MPLS issue on Cat5500-rsm

Sean Watkins sean at northrock.bm
Fri Mar 3 09:53:33 EST 2006


\
> > P-2#show mpls forwarding-table
> > Local  Outgoing    Prefix            Bytes tag  Outgoing   Next Hop
> > tag    tag or VC   or Tunnel Id      switched   interface
> > 16     Pop tag     5.1.1.2/32        0          Vl71       10.1.2.1
> > 17     Untagged    5.1.1.206/32      0          Vl72       10.1.3.1
> > 18     Untagged    10.1.1.0/24       1840       Vl72       10.1.3.1
> > 19     Untagged    5.1.1.1/32        0          Vl72       10.1.3.1
> > 
> > I've looked on CCO, for that above error message, nothing found?
> 
> can you check "show mpls forwarding label 18 detail" as well 

P-2#show mpls forwarding-table labels 18 detail 
Local  Outgoing    Prefix            Bytes tag  Outgoing   Next Hop    
tag    tag or VC   or Tunnel Id      switched   interface              
18     Untagged    10.1.1.0/24       4668       Vl72       10.1.3.1     
        MAC/Encaps=0/0, MRU=1528, Tag Stack{}
        No output feature configured
    Per-packet load-sharing
P-2#

I take it the no outbound label, is the issue?



> as "show adjacency vlan172"? For a yet-to-be determined 
> reason, the LFIB has an incomplete adjacency. 

P-2#show adjacency vlan72
Protocol Interface                 Address
TAG      Vlan72                    10.1.3.1(7)
IP       Vlan72                    10.1.3.1(19)
P-2




> 
> BUT: why do you have "Untagged" on vlan172? This breaks any MPLS-VPN..
> 
> Either way: I don't think we support MPLS on the Cat5500's 
> RSM/RSFC, not sure..
> 

Software advisor says its in all the IOS for the RMS.. Mpls in every other
way appears to work?

Sean


More information about the cisco-nsp mailing list