[c-nsp] Accessing Pix Device Manager over VPN Client

[Jeff Kell]

Serhat Candan wrote:
> Hello all,
>
> Is it possible to use PDM software by using vpn client remote acess (client to side) connection? I configured an ip scope from inside network (i.e. 192.168.10.1-10 from 192.168.10.0/24) and vpn client can connect inside network. I also set "http" and "pdm location" both inside and outside parameters but i can not be able to start PDM.
>
> How should i configure pix to allow pdm connection over vpn client?
Most likely you just need to add 'management-access inside' if the VPN
scope is inside.

Jeff