[c-nsp] GSR ge-gbic-sc-b traffic limit?

[Peter Salanki]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

You should see a CPU increase as the bandwidth increases. How did you  
get the result of 225mbit?

/Peter Salanki
Bahnhof AB (AS8473)
Stockholm, Sweden

6 mar 2006 kl. 17.47 skrev Kevin Scheunemann:

> I just put a 12008 into production this weekend with 1 grp-b and 2
> ge-gbic-sc-b with a full switch fabric.
> With my daily traffic load, I am unable to push more than 225Mbit/ 
> sec or
> 26581 packets/sec.
> The cpu load on the linecards is really low 4% to 6%.
> I have one ACL on inbound traffic on one of the interfaces, I disabled
> the acl for the interface but that did'nt help.
> Is there anything else I can check as to why the performance is'nt
> there?
>
> Kevin
>
>
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (Darwin)

iD8DBQFEDGm9iQKhdiFGiogRApeFAKCPyouxFyUUoMjqymX2B/4g640M/ACfRDDq
ePbvGxqxWFSy1duSaSEhIEE=
=0emy
-----END PGP SIGNATURE-----