[c-nsp] DSL PPPoE Static IP via RADIUS
Kristofer Sigurdsson
kristosig at gmail.com
Wed Mar 8 12:20:02 EST 2006
> You are right that applying a "ip vrf forwarding" command to an
> interface removes any previously configured IP address. This is why you
> commonly apply
>
> Cisco-avpair = "lcp:interface-config#1=ip vrf forwarding foo",
> Cisco-avpair = "lcp:interface-config#2=ip unnumbered LoopbackX"
>
> within your Radius profile. The tags (#1, #2) make sure that the
> attributes are applied in this very order, no matter in which order they
> arrive within the profile.
Ahh! Of course. :-) I was using the same loopback for all customers,
so I just put that statically in the router config. That was
obviously removed when the VRF config came via RADIUS...
This is fixed now, thanks a lot.
-Kristo
More information about the cisco-nsp
mailing list