[c-nsp] IP NAT Pool with 2 serials
Kenny Sallee
k_sallee at yahoo.com
Mon Mar 13 17:52:10 EST 2006
There's also OER (Optimized Edge Routing) which seems
a little more intelligent then the solution below for
your scenario (I've never set it up however so can't
tell you for sure):
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_8/gt_oer1.htm
http://www.cisco.com/en/US/products/ps6628/products_ios_protocol_option_home.html
Kenny
--- Mounir Mohamed <mounir.mohamed at gmail.com> wrote:
> Dear Oliver,
>
> Thank you very evry much,
>
> As your usual behavior à very helpful :)
>
>
>
> Best Regards,
> Mounir Mohamed
>
>
>
> On 3/13/06, Oliver Boehmer (oboehmer)
> <oboehmer at cisco.com> wrote:
> >
> > Mounir Mohamed <> wrote on Monday, March 13, 2006
> 10:24 AM:
> >
> > > Dear All,
> > >
> > > One of the customers owned internet Link from
> our ISP and another
> > > Link from another provider and he need to
> configure tow NAT pools
> > > each of them matches the same customer LAN and
> but assigning
> > > different IPs (POOl1=ISP1 & POOL2=ISP2) and he
> laso need if one of
> > > the providers serial failed the customer using
> the active provider
> > > POOL
> >
> > check out
>
http://www.ciscotaccc.com/iprout/showcase?case=K81227071
> for a
> > sample config on how to achieve this.
> >
> > oli
> >
>
>
>
> --
> Best Reagrds,
> Mounir Mohamed
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at
> http://puck.nether.net/pipermail/cisco-nsp/
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
More information about the cisco-nsp
mailing list