[c-nsp] NIC teaming

[Dave Temkin]

This will not work as you cannot have traffic to a single MAC address
exiting through multiple active paths.  I'm suprised you don't have
messages complaining of MAC flapping on the 6509..


You either need to do fail-on-fault NIC teaming or plug them into the same
6000.

-Dave

On Tue, 14 Mar 2006, Henry Anslinger wrote:

> Hi
>
> I am having some issues with servers in a NIC teaming setup. The server is plugged into 2 seperate 6000s which are in turn plugged into a 6509. The server admin is seeing dropped packets on the active NIC and I was wondering if there are any known issues with this kind of setup. The NICs on the server are in a active/standby setup.
>
>              __________6000_________
> server<__________6000_________ >6509
>
> Thanks
> Ivan
>
>
> ---------------------------------
> On Yahoo!7
>   Messenger: Make free PC-to-PC calls to your friends overseas.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>