[c-nsp] 6500-MSFC2(c6sup22) - MPLS

[David Freedman]

Oh, maybe thats my misinterpretation, I was remembering the following :

"–You cannot have a direct Layer 2 connection between PEs with EoMPLS."

from

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750m/12114ax/3750mscg/swmpls.htm


Dave.


Oliver Boehmer (oboehmer) wrote:
> David Freedman <> wrote on Wednesday, March 22, 2006 12:31 PM:
> 
>> Do you have these two PE routers connected to eachother?
>> 
>> In which case then this is PHP at work and I'm not sure this is a
>> supported configuration for EoMPLS,
> 
> it is a perfectly valid and supported configuration.
> 
> 	oli
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>