[c-nsp] Voltage outside of nominal range
szilard csordas
redmond at freemail.hu
Thu Mar 30 08:44:17 EST 2006
hello,
I have a strange long entry in 6500 (sup720) - 122-18.SXF
module 2: 4-subslot SPA Interface Processor-400 (7600-SIP-400)
submod: 2/0 2xGE SPA (SPA-2X1GE).
The connection is working properly.
%SPA-2-VOLT_CRITICAL: SPA-2X1GE[2/0] voltage outside of nominal
range. Nominal (1500mV), value(1575mV)
...
%SPA-2-VOLT_CRITICAL: SPA-2X1GE[2/0] voltage outside of nominal
range. Nominal (1500mV), value(1584mV)
...
%SPA-2-VOLT_CRITICAL: SPA-2X1GE[2/0] voltage outside of nominal
range. Nominal (1500mV), value(1585mV)
sh power
system power redundancy mode = redundant
system power total = 2669.10 Watts (63.55 Amps @ 42V)
system power used = 622.02 Watts (14.81 Amps @ 42V)
system power available = 2047.08 Watts (48.74 Amps @ 42V)
the value in bracket is increasing by one after ~1.5h.
any advice is appreciated.
thx,
szilard
_________________________________________________________________________
Digitális fényképezőgépek rendkívüli csomagajánlatokkal, fotókidolgozás már 25,- Ft-tól
FotoMarket, már 5 éve az Ön fotószolgálatában! www.fotomarket.hu
More information about the cisco-nsp
mailing list