[c-nsp] Has anyone done PBR on a 3750ME?

[Church, Chuck]

I think you need the dual ipv6 and ipv4 routing template:
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configur
ation_guide_chapter09186a00805a6506.html#wp1077854

 
Chuck Church
Network Engineer
CCIE #8776, MCNE, MCSE
Netco Government Services
Enterprise Network Engineering
Home Office - 864-335-9473 
Cell - 864-266-3978
cchurch at netcogov.com
 
 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Graham Wooden
> Sent: Tuesday, May 02, 2006 4:34 PM
> To: cisco-nsp
> Subject: [c-nsp] Has anyone done PBR on a 3750ME?
> 
> Running the advanced IP sw, 12.2.25SED, C3750ME-I5K91-M, with 
> the SDM template 'routing', so I can do policy-based routing 
> - however, it's not
> working.   Looking through some command docs on cisco's 
> website, I do see a
> template called "routing-pbr", but its not available on my rev.
> 
> Any thoughts to what's up with 3750ME and this template?
> 
> -graham
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>