[c-nsp] GRE between Cisco and Juniper

[Piotr Marecki]

nothing fancy there ( as long as you are not using auth/seq numbers ). Here 
is one of my
tunnels :

[edit interfaces gr-1/2/0]
bubu at m7i-lab# show
unit 100 {
    tunnel {
        source 10.0.1.1;
        destination 10.0.4.1;
    }
    family inet {
        address 10.254.4.1/30;
        }
    }



----- Original Message ----- 
From: "Ivan c" <ivannetw at gmail.com>
To: <cisco-nsp at puck.nether.net>
Sent: Wednesday, May 03, 2006 12:14 PM
Subject: [c-nsp] GRE between Cisco and Juniper


> Hi All,
>
> I am looking to do GRE tunnels between a Cisco 7206 VXR and a Juniper M7i
> and I was wondering if there were and caveats? Anyone have a Juniper 
> config
> example?
>
> LAN---->7206(a)<---+
> +------>(b)m7i<-----LAN
>
> +----->7609<----->ATM_Cloud<--------<m7i<------+
>
> GRE between point a and point b
>
> <-----------------------------------------------STRETCH------------------------------------------------------------->
>
>
> Thanks
> Ivan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/