[c-nsp] Suggestion for catalyst fixed switches for small POP

[Paul Stewart]

How much traffic are you figuring on?  We have used a number of 2950's
in the past for small POP's and work great.... Bearing in mind traffic
levels never exceeded 100-150Mb for the total switch ;)

Paul Stewart
IP Routing/Switching
Nexicom Inc.
http://www.nexicom.net/  

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Affan Basalamah
Sent: Thursday, May 04, 2006 3:37 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Suggestion for catalyst fixed switches for small POP

Hi all,

Currently I am designing requirement for small POP using Juniper M10i
router, and I am looking for catalyst switch for ethernet aggregation to
connect to the juniper router. I am thinking for fixed switch (24 or 48
ports) since I am only require basic L2 ethernet connectivity and higher
number of ports.

I am looking for suggestion, is the 2960-24TC-L sufficient for basic
ethernet aggregation, or do I should choose 3560 series, or 3750 series?

Regards,

-affan

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/