[c-nsp] Rate limiting via radius

[Kristofer Sigurdsson]

Maybe you could use RADIUS AV-pairs to put in rate limiting commands
on the virtual access interfaces?

Like so:

cisco-avpair = lcp:interface-config#1=rate-limit input [...]

2006/5/4, Paul Stewart <pstewart at nexicomgroup.net>:
> Can anyone tell me what attributes I can use to do rate-limiting on our
> 7206VXR that's terminating DSL users both via PPPOE and PPPoVPDN?  Our
> 7206VXR has a number of l2tp tunnels coming in from our telco provider
> and also direct OC-3 termination from our own DSLAMS.
>
> We need a way to limit on a per customer basis using Radius....
>
> Thanks in advance,
>
> Paul Stewart
> IP Routing/Switching
> Nexicom Inc.
> http://www.nexicom.net/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>