[c-nsp] Rate limiting via radius

[Paul Stewart]

Thanks... We've had problems getting this to work but will continue
investigating..

Does anyone have a complete sample of this in a working radius config
file?  We're using Cistron if that matters...

Paul Stewart
IP Routing/Switching
Nexicom Inc.
http://www.nexicom.net/  

-----Original Message-----
From: Kristofer Sigurdsson [mailto:kristosig at gmail.com] 
Sent: Thursday, May 04, 2006 10:48 AM
To: Paul Stewart
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Rate limiting via radius

Maybe you could use RADIUS AV-pairs to put in rate limiting commands on
the virtual access interfaces?

Like so:

cisco-avpair = lcp:interface-config#1=rate-limit input [...]

2006/5/4, Paul Stewart <pstewart at nexicomgroup.net>:
> Can anyone tell me what attributes I can use to do rate-limiting on 
> our 7206VXR that's terminating DSL users both via PPPOE and PPPoVPDN?

> Our 7206VXR has a number of l2tp tunnels coming in from our telco 
> provider and also direct OC-3 termination from our own DSLAMS.
>
> We need a way to limit on a per customer basis using Radius....
>
> Thanks in advance,
>
> Paul Stewart
> IP Routing/Switching
> Nexicom Inc.
> http://www.nexicom.net/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>