[c-nsp] Rate limiting via radius

[Paul Stewart]

It's good now.. Sorry guys... Missed something.... Works great!

Thanks again to everyone for your help... That's what makes this list
the best!

Paul
 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
Sent: Thursday, May 04, 2006 1:12 PM
To: Oliver Boehmer (oboehmer)
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Rate limiting via radius

acs1-con-mb#sh interfaces vi1093 stats
Virtual-Access1093
          Switching path    Pkts In   Chars In   Pkts Out  Chars Out
               Processor         12       1341          9        145
             Route cache        166      23560        152      83933
                   Total        178      24901        161      84078

 

-----Original Message-----
From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com]
Sent: Thursday, May 04, 2006 1:05 PM
To: Paul Stewart
Cc: cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] Rate limiting via radius

Paul Stewart <mailto:pstewart at nexicomgroup.net> wrote on Thursday, May
04, 2006 6:10 PM:

> Sorry to bump my own post...;)
> 
> I'm getting much "warmer" now...
> 
> acs1-con-mb#sh interfaces vi988 rate-limit
> Virtual-Access988
>   Input
>     matches: all traffic
>       params:  128000 bps, 7500 limit, 7500 extended limit
>       conformed 1402 packets, 123100 bytes; action: transmit
>       exceeded 11 packets, 16566 bytes; action: drop
>       last packet: 3560ms ago, current burst: 6988 bytes
>       last cleared 00:00:32 ago, conformed 30000 bps, exceeded 4000
>   bps Output