[c-nsp] This Version of Cisco IOS Software is not supportedonNPE300

[Rodney Dunn]

I've passed this on to the product PM's to clean up.

The EOL Product Bulletin is the final word. It was amended
to include the actual final release versions to try and be
more clear.

Rodney

On Tue, May 09, 2006 at 11:31:38AM +1000, matt carter wrote:
> 
> > 
> > The NPE-300 went End-of-Sale 31dec01. End of Software Maintenance
> > was 31dec04. Software support ended with: 12.2(15)T, 12.0(29)S,
> > 12.1(19)E, and 12.3(10b).
> > 
> 
> yet the cisco docs quote NPE-300 in 12.4 guides and even have a copy and
> paste of a NPE-300 running 12.4T. its easy to see how one could be led
> astray..
> 
> eg
> Cisco IOS Server Load Balancer Config for Dynamic Virtual Tunnel Interfaces
> Configuration Guide
> 
> Cisco IOS Software, 7200 Software (C7200-JK9S-M), Version 12.4(4)T1, RELEASE
> SOFTWARE (fc4)
> Cisco 7206VXR (NPE300) processor (revision D) with 122880K/40960K bytes of
> memory.
> 
> eg
> 12.4 Multi-Protocol Label Switching Configuration Guide
>  Supported Chassis Types and Processors
> The Cisco 7200 and 7500 series routers can use the following chassis types
> and processors: 
> -Processors: NPE-225, NPE-300, and NPE-400
> 
> 
> eg
> 12.4 Quality of Service Solutions Configuration Guide
> # Cisco 7200 series:
> #    * NPE-200 or higher (NPE-300 recommended for per-virtual circuit (VC)
> class-based weighted fair queueing (CBWFQ)
> 
> 
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/