[c-nsp] VRF Import/Export of routes

[Chris Griffin]

Slightly OT, sorry.  Did we cover on the list that this *isn't* 
supported on the 6500/7600 running 12.2.18 yet?

Thanks
Chris

Peter Salanki wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Hello,
> 
> I have problems importing/exporting routes between the default  
> routing-table and a VRF.
> 
> For importing default->VRF, I have done:
> 
> interface Loopback10
>   ip vrf forwarding VRF1
>   ip address 10.13.37.1 255.255.255.255
> !
> ip vrf VRF1
>   rd 8473:100
>   import ipv4 unicast 2500 map VRF-IMPORT
>   route-target export 8473:100 route-target import 8473:100
> !
> route-map VRF-IMPORT-HUDIKSVALLS-STADSNAT permit 20
>   match community BACKBONE-TE-DOWNSTREAM
>   set ip next-hop 10.13.37.1
> !
> 
> This works fairly well, is this the correct way to do it?
> 
> I have tried exporting routes with the export keyword under ip vrf,  
> but without success.
> 
> The hardware is c3750G-24TS running advipservices 12.2(25)SED
> 
> 
> Sincerely
> 
> Peter Salanki
> Chief Network Engineer
> Bahnhof AB (AS8473)
> www.bahnhof.se
> Office: +46855577132
> Cell: +46709174932
> 
> 
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.2.2 (Darwin)
> 
> iD8DBQFEY0FMiQKhdiFGiogRAkTyAJ4hJOwWioW+hw5ghdJU1mRVrsg3sgCfWzIc
> EPQ+vSp31a/v5TKlLfcr4Ec=
> =hFs+
> -----END PGP SIGNATURE-----
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Chris Griffin                                cgriffin at ufl.edu
Sr. Network Engineer - CCNP                  Phone: (352) 392-2061
Network Services / Florida LambdaRail        Fax:   (352) 392-9440
University of Florida                        Gainesville, FL 32611