[c-nsp] L2TP Question

Ahmad Cheikh Moussa acm at netuse.de
Mon May 22 02:29:33 EDT 2006


Hi!

Tassos Chatzithomaoglou wrote:
> I believe domain should be "customer#home at dsl-dialin.de" under vpdn 
> group 222.
> It shouldn't contain the delimiter "%" ;)
> 
> If this doesn't work please post vtemplate 1 and aaa config too.
Unfortunately, it doesn't helped.
Here is the config:
aaa authentication login default line
aaa authentication login CONSOLE line
aaa authentication ppp DSL group radius
aaa authorization network DSL group radius
aaa accounting update periodic 60
aaa accounting network DSL start-stop group radius
aaa session-id common

interface Virtual-Template1
  mtu 1452
  ip unnumbered Loopback1
  ip verify unicast reverse-path
  ip accounting output-packets
  ip nat inside
  ip tcp adjust-mss 1412
  peer default ip address pool ADSL_IPS
  ppp authentication chap DSL
  ppp authorization DSL
  ppp accounting DSL
  ppp chap hostname netuse-dsl

Regards,
  Ahmad



-- 
Ahmad Cheikh-Moussa
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/




More information about the cisco-nsp mailing list