[c-nsp] Blade for 4506

[Simon Paterson]

Hi.

If you're running an older IOS release on your 4506, then the new blade
may not be recognised. You can still install it online without issue,
but the switch will call it something like 'unrecognised module', and
ignore it.

We encountered this when adding new WS-X4548-GB-RJ45 (10/100/1000)
blades to some 4506's that had been in service for several years.
An IOS upgrade, obviously, fixes this.

Simon

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rolf Mendelsohn
Sent: Thursday, 25 May 2006 7:10 a.m.
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Blade for 4506

Hi Jeff,

Yes, its fine and it will recongnise it.

cheers
/rolf


On Wednesday 24 May 2006 19:36, Rieman, Jeffrey wrote:
> I have a 10/100/1000 blade for a 4506 that I need to install.  Is it
ok
> to do this while the device is powered up?  Will it automatically
> recognize it?
>
>
>
> Thanks!
>
>
>
> Jeff
>
>
>
> --
>
> Jeff Rieman
> Project Manager
> Ohio Northern University
> (419)772-2497
> Email: j-rieman at onu.edu
> MSN <mailto:j-rieman at onu.eduMSN> : JeffRieman at msn.com
> AIM: jriemanwork
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Rolf Mendelsohn
ITA/MAXNET
+244 923524981
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/