[c-nsp] 4503 doesnt boot from 2nd ios in flash

gokhan senol gokhanciscottl at yahoo.com
Sat Nov 11 05:00:27 EST 2006


Hi,
i wanna boot the switch with EWA6  ios , but even i used boot system comman d, switch still boots from first image(SG.bin). And because of its a backbone switch i dont wanna delete the first image.
i also change confreg 

Configuration register is 0x102

UZ_4503#dir
Directory of bootflash:/
    1  -rwx    12026632   Aug 1 2006 12:21:47 +00:00  cat4500-ipbasek9-mz.122-31
.SG.bin
    2  -rwx    12531808   Nov 9 2006 23:54:22 +00:00  cat4000-i9s-mz.122-25.EWA6
.bin
27262976 bytes total (2704280 bytes free)


UZ_4503#sh run 
................
boot system flash cat4000-i9s-mz.122-25.EWA6.bin
........
.........
thkns



More information about the cisco-nsp mailing list