[c-nsp] power requirement for sup720 migration

[Gert Doering]

Hi,

On Wed, Nov 15, 2006 at 03:09:43PM -0600, Church, Chuck wrote:
> 1    WS-SUP720-BASE      315.00  7.50   315.00  7.50  on    on
> 2    WS-X6516-GBIC       315.00  7.50   315.00  7.50  on    on
> 3    WS-X6516-GBIC       142.80  3.40   142.80  3.40  on    on 
> 
> Yes, I realize that it's extremely borderline :)  Not sure why my
> 6516-GBIC blades are using different amounts of power either.  Might
> need to check some logs.  I hope half the blade isn't powered off...

I'd assume "number and type of GBICs in it".

In my case:

> > Slot Card-Type          Watts   A @42V Watts   A @42V State State
> > ---- ------------------ ------- ------ ------- ------ ----- -----
> > 1    WS-SUP720-3B        282.24  6.72   282.24  6.72  on    on
> > 2    WS-X6408A-GBIC      282.24  6.72   282.24  6.72  on    on

This blade is full.

> > 3    WS-X6408A-GBIC       84.00  2.00    84.00  2.00  on    on

... while this has only one GBIC plugged in.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de