[c-nsp] power requirement for sup720 migration

[Elmar K. Bins]

Re people,

> > (Anyone having -GBIC blades in *other* slots with differing power
> > requirements?)

I am not sure if this helps you, but that box here is:

PS   Type               Watts   A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1    PWR-1400-AC        1370.04 32.62  OK     OK     on
2    PWR-1400-AC        1370.04 32.62  OK     OK     on
                        Pwr-Allocated  Oper
Fan  Type               Watts   A @42V State
---- ------------------ ------- ------ -----
1    WS-C6503-E-FAN       57.54  1.37  OK
                        Pwr-Requested  Pwr-Allocated  Admin Oper
Slot Card-Type          Watts   A @42V Watts   A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
1    WS-SUP720-3B        282.24  6.72   282.24  6.72  on    on
2    (Redundant Sup)       -     -      282.24  6.72  -     -
3    WS-X6408A-GBIC       84.00  2.00    84.00  2.00  on    on


No problem at all with the "small" ACs, but we're on 230V here :)

Elmar.