[c-nsp] 3500xl sync time

Richey Goldberg richey at americainter.net
Tue Nov 21 18:06:40 EST 2006


 
Thanks to every one who replied.   "spanning-tree portfast" is exaxctly what
I am looking for.  

 
Richey
-----Original Message-----
From: matthew zeier [mailto:mrz at velvet.org] 
Sent: Tuesday, November 21, 2006 3:15 PM
To: Richey Goldberg
Subject: Re: [c-nsp] 3500xl sync time

Search for "spanning-tree portfast" - the delay is due to spanning tree
calculations.  If you're sure you're only going to be connecting host
devices, you can set each port to "spanning-tree portfast".

- mz

Richey Goldberg wrote:
> I am probably searching for the wrong term when I am Googleing for this
> problem.  Well it's not so much of a problem as it is an annoyance.    We
> have several towers were we have 3500XL switches.   When you unplug a
device
> from a port or bounce a port you have to wait for 15 to 30 or more 
> seconds for the LED to go from Amber back to Green.  During this time the
port is
> unusable while you are waiting for it to sync backup.   Is this normal for
> the 3500s or is something turned on / off I am missing?    
>  
>  
> Richey
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list