[c-nsp] How to disable the MODE button on catalyst 3550

[Alexandra Alvarado]

Hello,

If I have the "no setup express" command applied: 
	This command affects the recovery password process?
      And if it does, do exist any other way to recover the password in case
of lost?


Thanks Again.


A.A.A.A.


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Saku Ytti
Sent: Friday, November 24, 2006 1:38 AM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] How to disable the MODE button on catalyst 3550

On (2006-11-23 16:38 -0500), Alexandra Alvarado wrote:

> Today our network went down because a technician pressed the mode button
of
> a catalyst 3550 for about 10 seconds.  Do exist the possibility to disable
> that functionality to the mode button.

If you want to disable the button, open the box and dewire it. But
I'd rather suggest 'no setup express', since what your engineer
did, was start express setup.

-- 
  ++ytti
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/