[c-nsp] 7204vxr boot issue

[Skeeve Stevens]

OK... Can you give me a hint on how to chain load the 12.3 IOS from the 48MB
card?

I assume that the 12.3 BOOT edition on the 16mb will load first
automatically, but how do you then tell it to boot the 12.3 full feature
from the 48mb ATA PCMCIA?

...Skeeve


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Saku Ytti
Sent: Monday, 27 November 2006 3:01 AM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 7204vxr boot issue

On (2006-11-27 02:09 +1100), Skeeve Stevens wrote:
 
>     1  -rw-     2536176   Oct 23 2006 06:24:55  c7200-boot-mz.120-28d.bin
> 
> Which doesn't seem to recognise ATA PCMCIA cards.. So first Q is . 
> should it be able to?

No it should not.

> My idea was:
> 
> - Put 12.3 boot ios on the 16mb Flash
> - Tell bootloader to boot that
> - That boots and loads the 12.3 full ios off the ATA flash.
> 
> Would this work?

Yes it will. I'd recommend latest 12.0S that'll fit, if my memory serves me
correct it's 12.0(26)Sx, but it was pulled from CCO some time ago.

--
  ++ytti
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/