[c-nsp] mgre dilemma

[David Prall]

The tunnel key is required if you have multiple tunnels using the same
source address.

You shouldn't need it on the 7301. Have used without it, without issues.

David

--
David C Prall dcp at dcptech.com http://dcp.dcptech.com
  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of matt carter
> Sent: Monday, November 27, 2006 1:40 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] mgre dilemma
> 
> 
> hi all,
> 
> 7301 wont appear to bring up mgre without a tunnel key
> 
> multipoint	
> (Optional) Enables a GRE tunnel to be used in a multipoint 
> fashion. Can be
> used with the gre ip keyword only, and requires the use of 
> the tunnel key
> command.
> 
> but the sup 720 wont do mgre with tunnel key in hardware
> 
> %Warning: Feature not supported in hardware. Tunnel200 packets will be
> software switched
> 
> so what to do to avoid packets being software switched on sup720 ??
> 
> --matt
> 
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>