[c-nsp] QoS for VoIP basics

[Voll, Scott]

Are you really running 10 / half?  That would have to do with the voice
chop.  Change to at least full duplex.

Scott

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Adam Greene
Sent: Tuesday, November 28, 2006 3:17 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] QoS for VoIP basics

Hi,

I am trying to master basic QoS concepts in a test lab before deploying
general policies for our network:



        3750            |both connections 10/half
        |  |            |
 vlan700|  |vlan710     |
        |  |            |
        2950    
       ||  ||  
       ||  ||           |all connections 100/full
PC A--- |  | --PC B     |
        |  |            |
VoIP A--    --VoIP B    |


My aim is to make the VoIP traffic crystal clear no matter how much
traffic I push between the two PC's.

Here are my configs:

====
2950
====

wrr-queue bandwidth 100 1 1 0
wrr-queue cos-map 1 0 1 2 3 4 6 7
wrr-queue cos-map 4 5
!
class-map match-all VoIP
  match access-group 100
!
!
policy-map All_Phone_Traffic_46
  class VoIP
    set ip dscp 46
!
access-list 100 permit ip any any

PLUS the ports into which VoIP A and B plug are configured with
"service-policy input All_Phone_Traffic_46"

 

====
3750
====

(note that the following was generated via the "auto qos voip trust"
interface command)

mls qos map cos-dscp 0 8 16 26 32 46 48 56
mls qos srr-queue input bandwidth 90 10
mls qos srr-queue input threshold 1 8 16
mls qos srr-queue input threshold 2 34 66
mls qos srr-queue input buffers 67 33
mls qos srr-queue input cos-map queue 1 threshold 2  1
mls qos srr-queue input cos-map queue 1 threshold 3  0
mls qos srr-queue input cos-map queue 2 threshold 1  2
mls qos srr-queue input cos-map queue 2 threshold 2  4 6 7
mls qos srr-queue input cos-map queue 2 threshold 3  3 5
mls qos srr-queue input dscp-map queue 1 threshold 2  9 10 11 12 13 14
15
mls qos srr-queue input dscp-map queue 1 threshold 3  0 1 2 3 4 5 6 7
mls qos srr-queue input dscp-map queue 1 threshold 3  32
mls qos srr-queue input dscp-map queue 2 threshold 1  16 17 18 19 20 21
22 23
mls qos srr-queue input dscp-map queue 2 threshold 2  33 34 35 36 37 38
39 48
mls qos srr-queue input dscp-map queue 2 threshold 2  49 50 51 52 53 54
55 56
mls qos srr-queue input dscp-map queue 2 threshold 2  57 58 59 60 61 62
63
mls qos srr-queue input dscp-map queue 2 threshold 3  24 25 26 27 28 29
30 31
mls qos srr-queue input dscp-map queue 2 threshold 3  40 41 42 43 44 45
46 47
mls qos srr-queue output cos-map queue 1 threshold 3  5
mls qos srr-queue output cos-map queue 2 threshold 3  3 6 7
mls qos srr-queue output cos-map queue 3 threshold 3  2 4
mls qos srr-queue output cos-map queue 4 threshold 2  1
mls qos srr-queue output cos-map queue 4 threshold 3  0
mls qos srr-queue output dscp-map queue 1 threshold 3  40 41 42 43 44 45
46 47
mls qos srr-queue output dscp-map queue 2 threshold 3  24 25 26 27 28 29
30 31
mls qos srr-queue output dscp-map queue 2 threshold 3  48 49 50 51 52 53
54 55
mls qos srr-queue output dscp-map queue 2 threshold 3  56 57 58 59 60 61
62 63
mls qos srr-queue output dscp-map queue 3 threshold 3  16 17 18 19 20 21
22 23
mls qos srr-queue output dscp-map queue 3 threshold 3  32 33 34 35 36 37
38 39
mls qos srr-queue output dscp-map queue 4 threshold 1  8
mls qos srr-queue output dscp-map queue 4 threshold 2  9 10 11 12 13 14
15
mls qos srr-queue output dscp-map queue 4 threshold 3  0 1 2 3 4 5 6 7
mls qos queue-set output 1 threshold 1 138 138 92 138
mls qos queue-set output 1 threshold 2 138 138 92 400
mls qos queue-set output 1 threshold 3 36 77 100 318
mls qos queue-set output 1 threshold 4 20 50 67 400
mls qos queue-set output 2 threshold 1 149 149 100 149
mls qos queue-set output 2 threshold 2 118 118 100 235
mls qos queue-set output 2 threshold 3 41 68 100 272
mls qos queue-set output 2 threshold 4 42 72 100 242
mls qos queue-set output 1 buffers 10 10 26 54
mls qos queue-set output 2 buffers 16 6 17 61
mls qos

PLUS the two ports which connect to the 2950 are configured with:

srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape  10  0  0  0
mls qos trust dscp <-- (this was autoconfigured as trust cos, but I
changed it to dscp)
auto qos voip trust



Unfortunately, when I pump 10Mbps (100 TCP streams) between PC A and B,
the voice still chops up. 

Any hints? Maybe I'm missing something obvious.

Thanks,
Adam
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/