[c-nsp] inconsistent TLB values

[Jared Mauch]

	You should likely stop using the 'vlan database' command
and use the global config mode to create your vlans instead.

	conf t
	vlan 50 
         name LAB
	end

	This wil also help you if you ever replace your
sup/mfsc as the config will contain all your vlans.

	- jared

On Tue, Oct 03, 2006 at 11:16:33AM +0200, Olav Langeland wrote:
> Hi,
> 
> the following error appears when trying to change a VLAN name (cisco catalyst 6500, IOS 12.2(18)SXD6, switch is VTP server): 
> 
> --start--
> 6500(vlan)#vlan 50 name LAB
> VLAN 50 modified:
>     Name: LAB
> 6500(vlan)#apply
> VLAN 1002 TLB 1 VLAN 1 has inconsistent TLB values (0 / 0)
> 6500(vlan)#exit 
> VLAN 1002 TLB 1 VLAN 1 has inconsistent TLB values (0 / 0)
> APPLY failed.
> Use 'abort' command to exit
> 6500(vlan)#abort
> --end--
> 
> What gives? I found this: http://puck.nether.net/pipermail/cisco-nsp/2004-March/008948.html but not much response. Any help/tips appreciated. 
> 
> 
> Regards
> Olav Langeland
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.