[c-nsp] ADSL on 2621 or 2621XM

[Mathias at TelecityRedbus.com]

Couldn't be more clear. Thanks Adrian & Joe.

-----Original Message-----
From: Joe Maimon [mailto:jmaimon at ttec.com] 
Sent: 04 October 2006 18:38
To: Mathias Kenfack-Tabakem (LON)
Cc: adrian at creative.net.au; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] ADSL on 2621 or 2621XM



Mathias at TelecityRedbus.com wrote:

> Adrian,
> 
> I guess I'll need to upgrade my code (the current one is 12.1.20 IP
> PLUS). Where do you then specify the PVC? 

A pvc is an atm connection. You dont have one. You have an ethernet 
connection over an ethernet bridge which has an atm connection over a 
DSL signal on a copper pair back to a dslam connected........

Follow the previous suggestion.

> 
> Mathias,
> 
> -----Original Message-----
> From: Adrian Chadd [mailto:adrian at creative.net.au] 
> Sent: 04 October 2006 16:29
> To: Mathias Kenfack-Tabakem (LON)
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] ADSL on 2621 or 2621XM
> 
> I'm using the pppoe-client support. Amusingly, it needs pppoe-client
> over
> Ethernet support - there's pppoe over ATM but thats not what you want.
> 
> (The modem is talking ATM for you and giving you pppoe frames.)
> 

This e-mail is intended only for the use of the addressees named above and may be confidential. 
If you are not an addressee you must not use any information contained in nor copy it nor inform any person other than the addressees of its existence or contents.