[c-nsp] Subinterfaces on a 6500 Native?

[Asbjorn Hojmark - Lists]

> > 6500(config-if)#interface g2/12.100                         

> Works fine on SXF.  Remember to "no switchport" your 
> interface.  Also remember that Subint x is not unique to the
> interface - it uses the  global vlan pool.

Also remember that the switch must be running VTP transparent
for you to enter a VLAN number on the sub-interface.

> I'd been thinking about using a 6500 with sub-ints to pick up
> customers from external sources over Dot1Q trunks but then  
> you remember that a 6500 is not a "real" router and provider
> A's vlans can have namespace clashes with provider B's vlans. 
> Time to fire up a 7200.
> 
> 
> David
> ...
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>